Auto Brake Parts Ford S-Max Land Rover S60 1.5L 2.5L (2006-) 1380046

OE Number Or Parts Number And Testing

Fit Model

Structure

Disc brakes (discs) are divided into solid disc (single disc) and duct tray (double disc). Solid plate we are easier to understand, plainly, is solid. Ventilation disc (Vented Disc), as the name suggests has a ventilation effect. From the outside, it has a lot of holes in the circle to the center of the hole, known as the duct. Car in the exercise through the air duct air convection, to achieve the purpose of heat, than the solid heat effect is much better. Most of the cars are precursor, the use of frequency counters on the front plate wear a larger, so the use of the former duct plate, after the solid disk (single disc). Of course, there are before and after the duct dish, but the manufacturing cost is not bad outrageous.
The first picture in this article is a punched scribe plate, its braking performance and heat a certain increase, but the brake pads have a greater wear and tear. DIY modified brake discs, Tips: 1. The material must be good enough, not too much impact on the strength of the defects, such as large pores, trachoma, do not allow the existence of loose loose. 2. hole spacing and size distribution, etc., because more than a hole drilling, where the strength of the weak a bit. Such as disk broken, the consequences could be disastrous. Symmetrical homogeneous Such as the balance of the disk was seriously damaged, in the process of driving the spindle will have a certain impact. 3. This is a hard work, cautious and cautious. If there is no professional guidance, it is best not to recklessly.
Punching brake discs, also known as "high-speed disk" or "modified disk", are generally assembled in high-performance cars, like cars, sports cars or sports cars. With the rise of the domestic car industry in recent years the rise of the wind, there are many riders DIY DIY, from a variety of ways to get punched crossed brake disc and then hands-on dress. Punching brake disc is a double-edged sword, his benefits and the coexistence of the same, but this brake disc on the brake pads will increase the wear and tear on the brake disc material with the processing requirements are relatively high.

Advantage

1, disc brake has a good heat dissipation performance, not because of high-speed brake and production
Heat shock recession; In addition, the disc brake will not be due to continuous brakes caused by brake failure phenomenon, to ensure safe driving; disc brake drum drum structure is simple, easy maintenance.

2, we use advanced automation technology to ensure that the product in the production process of consistency and high quality.

3, we provide customers with personalized custom packaging, neutral packaging and other services. satisfy customer's request.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.