Auto Throttle Body For Ford Focus Mondeo S60 1.6L (2007-) 1751015

1, OE Number or Parts Number

1751015 / BE8Z9E926B / 7S7G9F991BA / 7S7G9F991CA / 1486105 / 0 280 750 535 / 0280750536 / 556184 / 7519175

2, Fit Model

3 , Testing And Warranty

4 , Taxonomy

⑴ electro-hydraulic throttle
Electro-hydraulic throttle, most of the application in the hydraulic system of construction machinery. It has the characteristics of simple structure, low cost, high driving force and low power consumption. The conversion of electro-hydraulic control is mainly realized by high-speed switch digital valve, and the control precision is high, and the hydraulic oil is not too high. However, due to the hydraulic system there is oil pressure fluctuations, the hydraulic actuator between the friction and the valve has the opening and closing characteristics of the impact, resulting in its position response is not accurate, slow response speed. Therefore, electro-hydraulic throttle rarely used in the car.
⑵ linear solenoid type throttle
Electromagnet type throttle with proportional solenoid as a controller. It uses electromagnetic force as the driving force, in which the control signal for the current signal, with a simple structure, small size, easy control, fast response, steady-state precision, but its maximum force by the coil turns and the maximum operating current limit , And in a certain workload under the required power consumption is relatively large. Therefore, linear electromagnetic throttle rarely used in the car.
⑶ stepper motor-type throttle
Stepper motor-type throttle through the stepper motor directly drive throttle shaft to achieve the throttle opening control. Driving stepper motors are usually bridge circuit structure, the control unit through the number of pulses issued, the frequency and direction control level of the stepper motor control. Stepper motor has the advantages of simple structure, high reliability and low cost, but its control precision is not high. Therefore, stepper motor-type throttle is also less applied in the car.
⑷ DC servo motor type throttle
DC servo motor using pulse width modulation (PWM) technology, which is characterized by high frequency, high efficiency, high power density, high reliability. The control unit controls the size of the DC motor by adjusting the duty cycle of the pulse width modulation signal. In addition, the motor output torque and pulse width modulation signal is proportional to the duty cycle. Because of the above advantages, DC servo motor is widely used in electronic throttle control.

5 , Advantage

1, we use high-quality raw materials and high-precision electronic control unit for customers to produce high-quality throttle, can also be customized according to customer requirements to meet the requirements of different customers.

2, throttle control system can be the biggest advantage of the engine can achieve the full range of the best torque output, precise control throttle opening to improve the engine emissions performance, with higher vehicle reliability, can choose a different job Mode, the advantages of altitude compensation can be obtained.

3, we use imported processing equipment to ensure that the product in the production process of accuracy.

4, we provide customers with personalized custom packaging, neutral packaging and other services. fulfill customer's request.

5, we have a fully automated production equipment, can be carried out per month 100,000 injectors to meet customer demand for production capacity.

6 , FAQ (Fluently Asked Questions)

Q1. If we don't find the model type here, Please tell us.
1, Please send us your OEM number.
2, Please send us your photo and products size if you have.
3, Please tell us your exact car model if you do not have photo or OEM number.

Q2. What is your sample policy?
1, We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q3. Do you test all your goods before delivery?
1, Yes, we have 100% test before delivery.

Q4. What is your terms of payment?
1, T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q5. What is your terms of delivery?
1, EXW, FOB, CFR, CIF, DDU.

Q6. How about your delivery time?
1, Generally, it will take 3 to 35 days after receiving your advance payment. The specific delivery time depends on the item's inventory and the quantity of your order.

.

  Shanghai Hongshi Mechanical Co., Ltd is the production of auto parts as the main product of the enterprise. In order to facilitate the export of goods and the reception of customers, the board of directors decided to set up a professional sales company. So the Shanghai Hongshi Mechanical Co., Ltd was founded in Shanghai in 2015. Our company own 5 factories and cooperate with 13 factories. The factory covers an area of 200 thousand square meters, mainly in Anhui, Jiangsu, Zhejiang, Shandong, Hebei provinces. The main products: ignition coil, spark plug, spark plug, nozzle, filter, solar term door, fuel pump, brake, starter, engine, compressor, blower control module and other auto parts. We have the ability to provide customers with mass production and diversity.

  Our factories have professional professors, senior engineers and other technical personnel, and constantly research and develop the new materials, more durable, safer products. The structure is more optimized and the cost is lower. Enjoy a high reputation in the industry.

  Our factories has advanced equipment of production, such as: high precision sealing machine imported from Germany (brand name: Heydrich), high speed automatic winding machine from Japan, all kinds of equipment of testing and application by homemade, fully automated assembly line production, advanced casting equipment, cold extrusion equipment, high-precision CNC processing equipment, and advanced ceramic manufacturing equipment. Provide a strong guarantee for the quality of our products and our reputation.

  Our products manufactured by the factory are strictly inspected by the quality department before they can be sent to the customer. The quality engineers conduct a rigorous inspection of the raw material and process of the product. Conduct effective testing of products using various simulated laboratory equipment to make sure the product safely and durably.

  Our current dozens of types of products are exported to North America, South America, Europe, Asia and part of Africa. In 2016, our customers were satisfied with our products and services by 98%. We will continue to strive to provide customers with better products and services.

The pursuit of customer satisfaction is the eternal goal of every employee of Xineng. For those who use our accessories, happy travel, safe home. It is the target of fine production for our staff.